Detailing Clay Bar 200g (Soft Medium Heavy)
D-TAIL LAB Detailing Clay Bars lift bonded contamination that washing cant touch traffic film, bugs, resin, light overspray, iron residues leaving paint smooth and ready for polishing or protection. Available in three grades (Soft, Medium, Heavy) to match the job and paint type.
Why You’ll Love It
- Real decon results rapidly removes embedded grit for a glassy finish before correction/protection.
- 3 grades, one workflow start Soft on sensitive paint; step up to Medium/Heavy where needed.
- Easy to handle 200g bar with good elasticity; stores in its protective box for reuse.
- Versatile surfaces safe for painted and chrome surfaces when properly lubricated.
Pairs Well With
- Iron remover (chemical decon first): PURGE pH-Neutral Iron & Fallout Remover
- Wash solution (pre/post):FOMO pH-Neutral Car Shampoo
- Synthetic alternative for maintenance: Synthetic Clay Towel 3.0
How To Use
- Pre-wash & wash: Rinse, then contact-wash with FOMO; rinse thoroughly.
- Chemical decon (recommended): Spray PURGE on cool panels, allow reaction, then rinse.
- Lubricate: Mist a small section generously with soapy water or SYNERGY rinseless wash.
- Clay: Flatten a piece of clay. Glide with light pressure in straight lines until the surface feels smooth. Fold to a clean face as it loads.
- Wipe & inspect: Buff residue with a clean microfiber and check under proper lighting.
- Protect: Optionally re-wash, then apply your chosen protection (sealant/coating/wax).
Notes: Always test on an inconspicuous spot. Use the least aggressive grade that achieves the goal. Do not clay on dry paint or under direct sun/hot panels.
