This product is no longer available – Check out this alternative product:
CPD 406A/406B – Room Temperature Surface Coat
PolyPoxy 6005 a white, thixotropic, room temperature curing (RTV) surface coat epoxy designed for quality reproduction of a variety of surfaces. This epoxy is a general purpose surface coat formulated for the fabrication of laminated tools, including dies, foundry patterns, core boxes, and router, trim and inspection fixtures. When cured, this resin system provides a hard, tough, and chip-resistant surface.
This non-sag formula has a pot life of 18 to 22 minutes, a demold time of 8 to 12 hours, and cures to a Shore D89 hardness.
WARNING: This product contains crystalline silica, quartz (CAS 14808-60-7), a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
FOR INDUSTRIAL/PROFESSIONAL USE ONLY.
TECHNICAL SPECIFICATIONS
- Mix Ratio by Weight: 1A:2B
- Mixed Viscosity: 2000 cP
- Cream Time: 25 sec.
- Rise Time: 1.5 min.
- Tack-Free Time: 3 min.
- Free-Rise Density: 3 lb/ft
- Molded Density Range: 5-8 lb/ft
- Demold Time: 10 min.
Kit Components
| PolyPoxy 6005 | Components |
| 2.75-lb kit includes | 2.33 lb ofPolyPoxy 6005 Resin(~1 quart) 0.42 lb of PolyPoxy 6005 Hardener(~0.5 pint) |
| 9.34-lb kit includes | 8 lb of PolyPoxy 6005 Resin(~1 gallon) 1.34 lb of PolyPoxy 6005 Hardener(~1 quart) |
| 53-lb kit includes | 45 lb of PolyPoxy 6005 Resin(~5 gallons) 8 lb of PolyPoxy 6005 Hardener(~1 gallon) |
