Sharpen Front End Turn In Without Sacrificing Ride Height
The FR-S handles well from the factory, but its front sway bar is tuned conservatively for a wide range of drivers. The SuperPro SPRRC0015FZ-22 replaces it with a 22mm hollow front bar and a 2-position adjustable end link, giving you a real say in how sharp the front end responds when you turn in.
Key Features
- 22mm hollow front sway bar sized specifically for the FR-S chassis
- 2-position adjustable end link mounting for two distinct stiffness settings
- SPRRC0015FZ-22 bolts to factory mounting points with no drilling or cutting required
- Reduces front body roll and sharpens turn in response during hard cornering
- Pairs with factory springs or aftermarket coilovers without affecting ride height
- SuperPro polyurethane bushings included at all mounting points for a firmer connection than rubber
Fitment
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 2013-2016 | Scion | FR-S |
Specifications
| Detail | Value |
|---|---|
| MPN | SPRRC0015FZ-22 |
| Brand | SuperPro |
| Position | Front |
| Bar Diameter | 22mm |
| Adjustability | 2-position adjustable end link |
| Bushing Material | Polyurethane |
| Warranty | Lifetime warranty on SuperPro polyurethane bushings |
| UPC | Not published by manufacturer |
What’s Included
- 22mm hollow front sway bar
- Polyurethane mounting bushings
- 2-position adjustable end link hardware
- Installation hardware kit
About SuperPro
SuperPro has engineered performance suspension components since the 1970s, with the Roll Control line built to let drivers of chassis like the FR-S and BRZ dial in handling balance front to rear without a full suspension overhaul.
Related Parts on Our Site
- Shop more suspension and sway bar components
FAQ
What is the SPRRC0015FZ-22?
The SPRRC0015FZ-22 is a SuperPro 22mm adjustable front sway bar kit for the Scion FR-S that sharpens turn in response with a 2-position end link.
What is the difference between the two end link positions?
The two positions change the leverage on the bar, giving you a softer setting for daily comfort and a stiffer setting for spirited driving or track days.
Does this bar require lowering the vehicle?
No, the SPRRC0015FZ-22 bolts to the factory mounting points and works at stock ride height, and also functions normally with lowered springs or coilovers.
Will this front sway bar cause understeer?
A stiffer front bar alone can increase understeer tendency, which is why many owners pair it with a rear sway bar upgrade to keep the front to rear balance in check.
Do I need an alignment after installing this sway bar?
No, installing a sway bar does not change suspension geometry, so an alignment is not required, though it is good practice after any suspension work.
Is this kit covered under warranty?
Yes, SuperPro backs its polyurethane bushings with a lifetime warranty to the original purchaser.
Can this be installed with basic hand tools?
Yes, most installers complete this swap in under two hours using basic hand tools and a jack and jack stands.
Does this bar also fit the Subaru BRZ or Toyota 86?
SuperPro produces this bar for the shared FR-S, BRZ, and 86 platform, but this listing is scoped specifically to the 2013-2016 Scion FR-S.
Install Instructions
- Raise and safely support the front of the vehicle on jack stands
- Remove the factory front sway bar end links and mounting bracket bolts
- Slide the factory sway bar out and remove the old rubber bushings from the mounting brackets
- Install the new SuperPro polyurethane bushings onto the 22mm SPRRC0015FZ-22 bar
- Position the new bar in place and reinstall the mounting brackets, torquing to factory specification
- Connect the end links at your chosen adjustable position
- Lower the vehicle and cycle the suspension to confirm clearance and no contact with other components
